Dodge 2012 Charger SRT8 Manuel d'utilisateur télécharger pdf (Page 371)

100

101

2. The ignition switch will return to the OFF position.

3. If the shift lever is not in PARK, the ENGINE START/

STOP button must be held for two seconds and vehicle

speed must be above 5 mph (8 km/h) before the engine

will shut off. The ignition switch position will remain in

the ACC position until the shift lever is in PARK and the

button is pressed twice to the OFF position. If the shift

lever is not in PARK and the ENGINE START/STOP

button is pressed once, the EVIC (if equipped) will

display a “Vehicle Not In Park” message and the engine

will remain running. Never leave a vehicle out of the

PARK position, or it could roll.

NOTE: If the ignition switch is left in the ACC or RUN

(engine not running) position and the transmission is in

PARK, the system will automatically time out after

30 minutes of inactivity and the ignition will switch to the

OFF position.

ENGINE START/STOP Button Functions – With

Driver’s Foot OFF The Brake Pedal

(In PARK Or NEUTRAL Position)

The ENGINE START/STOP button operates similar to an

ignition switch. It has four positions, OFF, ACC, RUN

and START. To change the ignition switch positions

without starting the vehicle and use the accessories

follow these steps.

•

Starting with the ignition switch in the OFF position:

•

Press the ENGINE START/STOP button once to

change the ignition switch to the ACC position (EVIC

displays “ACC”),

•

Press the ENGINE START/STOP button a second time

to change the ignition switch to the RUN position

(EVIC displays “RUN”),

•

Press the ENGINE START/STOP button a third time

to return the ignition switch to the OFF position (EVIC

displays “OFF”).

STARTING AND OPERATING 369

1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 572 573

Commentaires sur ces manuels

Pas de commentaire

Dodge 2012 Charger SRT8 Manuel d'utilisateur Page 371

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Dodge 2012 Charger SRT8