Dodge 2010 Nitro Manuel d'utilisateur Page 297

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 498
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 296
ENGINE BLOCK HEATER IF EQUIPPED
The engine block heater warms the engine, and permits
quicker starts in cold weather. Connect the cord to a
standard 110-115 Volt AC electrical outlet with a
grounded three-wire extension cord.
The engine block heater cord is found under the hood
clipped to the heater line on the left side of the engine.
WARNING!
Remember to disconnect the cord before driving.
Damage to the 110-115 Volt AC electrical cord could
cause electrocution.
Use the heater when temperatures below 0 °F (-18 °C) are
expected to last for several days.
AUTOMATIC TRANSMISSION
CAUTION!
Damage to the transmission may occur if the follow-
ing precautions are not observed:
Shift into PARK only after the vehicle has come to
a complete stop.
Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the engine
is at idle speed.
Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
idle speed.
Before shifting into any gear, make sure your foot
is firmly on the brake pedal.
296 STARTING AND OPERATING
Vue de la page 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 497 498

Commentaires sur ces manuels

Pas de commentaire