Dodge 2006 Charger SRT8 Manuel d'utilisateur télécharger pdf (Page 198)

A reset feature is available to allow the vehicle to be

driven to a dealer for service. To reset the transmission,

use the following procedure:

1. Stop the vehicle.

2. Move the selector lever to the PARK position.

3. Turn off the engine.

4. Wait approximately 10 seconds.

5. Restart the engine.

6. Move the shift lever to the desired range. If the

problem is no longer detected, the transmission will

return to normal operation.

NOTE:

Even if the transmission can be reset, we

recommend that you visit a dealer at your earliest

possible convenience. Your dealer has diagnostic equip-

ment to determine if the problem could recur.

Have the transmission checked at your authorized dealer

as soon as possible.

If the problem has been momentary, the transmission can

be reset to regain all forward gears.

Permanent Transmission Limp Home Mode

Permanent Limp Home Mode will be activated if the

transmission enters temporary Limp Home Mode three

times. Follow the reset procedure described in the previ-

ous section. In Permanent Limp Home Mode, PARK(P),

REVERSE(R) and NEUTRAL(N) will continue to operate.

SECOND gear will operate in the DRIVE(D) shifter

position. The malfunction indicator lamp may illuminate.

198 STARTING AND OPERATING

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 335 336

Pas de commentaire

Dodge 2006 Charger SRT8 Manuel d'utilisateur Page 198